MTP Cable Assemblies

MTP to MTP 10 Gig 50 Micron Patch Cable

There are a few different configurations for MTP cable assemblies. The most popular is the MTP to MTP patch cable that connects an MTP cassette to another MTP cassette. Or, if you have an MTP adapter panel installed in a patch panel, then you can use MTP to MTP in that case, as well.

Another configuration is MTP to LC. You have one MTP connector on one end and you have a breakout (usually 3 feet) of 12 LC connectors on the other side (pictured to the left). You can use these for a few different applications for both back end and front end. In an MTP adapter panel, for instance, you can plug in one MTP connector into the back and plug in an MTP to LC cable in the front and have the 12 LC connections go to your equipment. Or, let's say you have an MTP cassette that you want to be lit up by using a 12-fiber LC adapter panel. Plug in each of the 12 LC connections in the LC adapter panel and then have the MTP side plug into the back of the cassette. There are other applications, as well, depending on how your network is set up. Enterprise, Ribbon fiber, and secure are all different types you can work with. Increase your transfer speed with 10 Gig 50 Micron multimode cable or increase the distance your signal can travel using singlemode.

To reiterate, the MTP cable assemblies can be both Multimode and Singlemode, and there are also secure applications. Contact us today if you're unsure of what you need and we'll be happy to assist you.